• Using the intelligent multi-function CPU system, automatically identify the coin by material , thickness and diameter .
• Every kind of coins can program 45 pieces.
• Can at any time adjust to throw the accurate degree of the currency machine ,in keeping with different amenity demand .
• The product include software guard system, this guard system has alarm system ,which prevent opportunistic behaviors .
• Can connect the counter.
• It can supply digital byte output and make some modification in the output program according the demand .

SETTING INSTRUCTION OF PRODUCT:

• Turn the sensitive switch to stir to the "NOM" position , then turn the setting switch to stir to the "SET" position. It can set one coin come out one signal .
• If turn the sensitive switch to stir to the "MGN" position , then turn the setting switch to stir to the "SET" position. It can set several coins come out one signal .
• Deposit the coins in turn, the more you can programming are 45 coins .If less than 45 coins ,can add and store later .After the memory of the storage is full ,it will have three "BI~BI~BI" tone to apprize you .
• If need to cancel the programmed coins , program step 1 or step 2.Press the adjust value switch and don't set free ,you will hear a long "BI~~~" tone after 2 seconds .

STANDARDS AND OPERATIONG INSTRUCTION :

• Apply to coin's diameter = 18m/m ¨C29m/m
• Apply to coin's thickness = 1.2m/m ¨C 3.0m/m
• Work voltage = DC12V
• Temperature =-20 ~50

1. Operate with the game machine's standard. Switch to the correct mode with Normal Open(N.O) and Normal Close (N.C.) Usually use Normal Open .

2. Switch to the correct speed (pulse) of coin machine.
FAST :25ms(short pulse signal)
MEDIUM:45ms(medium pulse signal)
SLOW:65ms(long pulse signal by TIMER SWITCH for synchronizing with your machine)

3. When the coin acceptor is used , the coin setting switch needs to be set correctly according to the coin that was selected .

4. The switch which for adjusting the coin's value , can setup several coins come out one signal or cancel the programmed coin.When program the several coins come out one signal, the initial setting is two tone "BI~BI", it means after you deposit two coins it'll send out one signal .Press the switch again, it'll have one more "BI" tone ,and like the same,the more it'll happen five coins come out a signal .

5. The switch for test the coin's sensitive degree, it detects the difference between real/fake coin ,when inserted .

6. Please turn on power about 10 minutes before using or setting you can get the optimal effect

7. Connecting instructions of connector:

Gray line
Red line DC+12V
White line COIN Signal counter
Black line GND(Ground)
Gray line

• Using the intelligent multi-function CPU system, automatically identify the coin by material , thickness and
  diameter .
• It offer 15 memories additionally extra store, for programming new version euro coin.
• Can at any time adjust to throw the accurate degree of the currency machine ,in keeping with different
  amenity demand .
• The product include software guard system, this guard system has alarm system ,which prevent
  opportunistic behaviors .
• Can connect the counter.

• Turn the sensitive switch to stir to the "NOM" position, then turn the setting switch to stir to the "SET" position. You can set extra to store coins. After set completed, turn the setting switch to the "START" position, then can use it.
• Deposit the coins in turn, the more you can programming are 15 coins .If less than 15 coins, can add and store later .After the memory of the storage is full ,it will have three "BI~BI~BI" tone to apprize you .
• If need to cancel the extra programmed coins, program step 1. Press the adjust value switch and don't set free, you will hear a long "BI~~~" tone after 2 seconds .

• Apply to coin's diameter = 18m/m ¨C29m/m
• Apply to coin's thickness = 1.2m/m ¨C 3.0m/m
• Work voltage = DC12V
• Temperature =-20 ~50