.jpg)
CPU RECOGNISE COIN ACCEPTOR
Model:C-315 (Multi-Coins Mode, must
be with LED display)
OPERATION MANUAL OF CPU RECOGNISE COIN ACCEPTOR
(1)INTRODUCTION OF MAIN FUNCTION
-
Using the intelligent multi-function CPU system, automatically identify the coin by material , thickness and
diameter . -
Can set up 3 different value groups at the same time, every value set can program 15 coins .
-
Can at any time adjust to throw the accurate degree of the currency machine ,in keeping with different
amenity demand . -
The product include software guard system, this guard system has alarm system ,which prevent
opportunistic behaviors . -
Can connect the counter.
-
It can supply digital byte output and make some modification in the output program according the demand .
(2) SETTING INSTRUCTION OF PRODUCT:
-
Turn the sensitive switch to stir to the "NOM" position ("MGN" position) , then turn the setting
switch to stir to the "SET" position. LED display "00"(display "P2"). -
Adjust the coin value in turn and let the LED display the value which you needed.
-
Deposit the coins in turn, the more you can programming are 15 coins .If less than 15 coins ,can
add and store later . -
If need to set up the other value group's coin after set up, then re-programming step 2 and step
-
If need exit, set up the setting switch to the "START" position, then can use it .
-
When need to cancel all of the programmed coins ,after finish step 1, LED display "00" then keep press the coin adjust switch ,you will be hear a "BI" sound and LED will display "C" ,this moment is ok .
-
If need to cancel one of the different value groups, finish step 1 and step 2, keep press the coin
adjust switch, you will be hear a "BI" sound and LED will display "C", this moment is ok .
(3) STANDARDS AND OPERATIONG INSTRUCTION :
-
Apply to coin's diameter = 18m/m ¨C29m/m
-
Apply to coin's thickness = 1.2m/m ¨C 3.0m/m
-
Work voltage = DC12V
-
Temperature =-20 ~50
1. Operate with the game machine's standard. Switch to the correct mode
with Normal Open(N.O) and
Normal Close (N.C.) Usually use Normal Open .
2. Switch to the correct speed (pulse) of coin machine.
FAST :25ms(short pulse signal)
MEDIUM:45ms(medium pulse signal)
SLOW:65ms(long pulse signal by TIMER SWITCH for synchronizing with your
machine)
3. When the coin acceptor is used , the coin setting switch needs
to be set correctly according to the coin
that was selected .
4. The switch which for adjusting the coin's value , can adjust the
coin value when the coin
programming . "00-99" means how many times of the output pulse
signal will be sent when the
programmed coin was deposited. "P2-P9" means a output pulse
signal needs how many programmed
coins to be deposited.
5. The switch for test the coin's sensitive degree, it detects the
difference between real/fake coin ,when
inserted .
6. Please turn on power about 10 minutes before using or setting
you can get the optimal effect
7. Connecting instructions of connector:
Gray line
Red line DC+12V
White line COIN Signal counter
Black line GND(Ground)
Gray line